Our second-hand machines – as good as new!
Our used machines are modernized by our qualified employees and their decades of experience in mechanical engineering. Components are usually completely dismantled, cleaned, and repainted as required.
The interior gets a “makeover” treatment. Wear parts, guide elements, fluid lines, sensors and cables in the machine area are replaced, working and milling spindles are overhauled in proven manufacturer quality, and the control system is upgraded to the state of the art.
Here you'll learn more about our machine refit:
https://www.index-traub.com/en/ixservices/refit/
Repurchase of used machines
We are also interested in repurchasing your used INDEX or TRAUB machine.
This applies in particular to machines built after 1995.
Just give us a call!
Refit-Team
+49 (0)711 3191-9612
Turn-mill center - INDEX G200 compact
Machine number: 511613
Year of manufacture: 2003
Basic equipment
Main spindle: max. d=42mm, C axis
Counter spindle: max. d=42mm, C axis
Tool carrier 1: X/Y/Z axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4D
Turn-mill center - INDEX G300
Machine number: 500302
Year of manufacture: 1999
Basic equipment
Main spindle: max. d=102mm, C axis, with single pressure clamping unit, manual
Counter spindle: max. d=90mm, C axis, with single pressure clamping unit, manual
Tool carrier 1: X/Y/Z/B axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4D
Multi-spindle automatics - INDEX MS25
Machine number: MS2512121
Year of manufacture: 1987
Basic equipment
Main drive:
Power (at 50 Hz) 15 kW
Speed (at 50 Hz) 1450 rpm
Multi-spindle automatics - INDEX MS25E
Machine number: MS25E25106
Year of manufacture: 2000
Basic equipment
Main drive:
Power (at 50 Hz) 22 kW
Speed (at 50 Hz) 5020rpm
Turn-mill center - TRAUB TNC65 DGY
Machine number: 7040605
Year of manufacture: 1997
Basic equipment
Main spindle: max. d=65 mm, C axis
Counter spindle: max. d=65 mm, C axis
Tool carrier 1: X/Z/Y axis
Tool carrier 2 : X/Z axis
Control: TRAUB TX8H
Sliding headstock lathes - TRAUB TNL12
Machine number: 6000305
Year of manufacture: 2001
Basic equipment
Main spindle: max. d=13mm, C axis
Counter spindle: max. d=13mm, C axis
Tool carrier 1: X/Y axis with tool drive
Tool carrier 2: X/Z axis with tool drive
Front working attachment: X/Z axis with tool drive
Back working attachment: X axis with tool drive
Control: TRAUB TX8i
Sliding headstock lathes - TRAUB TNL26
Machine number: 6030363
Year of manufacture: 2002
Basic equipment
Main spindle: Holder for live guide bush, programmable, type T 227, max. clearance 26mm,, C axis
Counter spindle: as motor-driven with Z4 slide, C axis
Tool carrier 1: X1/Y1 axis
Tool carrier 2: X2/Y2/Z2 axis
X3 slide: X3 cross axis for front working attachment/counter spindle
Control: TRAUB TX8i
Short automatic lathe - TRAUB TNK36
Machine number: 7100806
Year of manufacture: 2008
Basic equipment
Main spindle: Spindle clearance for high-strength materials max. 30 mm, C axis
Counter spindle: Counter spindle as motor-driven spindle incl. hollow clamping and locking unit, C axis
Tool carrier 1: X1/Y1/Z1 axes
X3 slide: X3 cross axis for front working attachment/counter spindle
Control: TRAUB TX8i
